Technical Data
Angle grinder | GWS 750-100 | GWS 750-125 | GWS 710 | |
|---|---|---|---|---|
Article number | 3 601 C94 0.. | 3 601 C94 0.. | 3 601 C94 0.. | |
Rated power input | W | 750 | 750 | 750 |
Power output | W | 380 | 380 | 380 |
Rated no-load speedA) | min–1 | 11,000 | 11,000 | 11,000 |
Max. grinding disc diameter/rubber sanding pad diameter | mm | 100 | 125 | 125 |
Grinding spindle thread | M10 | M14 | M14 | |
Max. thread length of grinding spindle | mm | 16 | 22 | 22 |
Restart protection | ● | ● | ● | |
Weight according to EPTA-Procedure 01:2014B) | kg | 1.8–2.0 | 1.8–2.0 | 1.8–2.0 |
Protection class |
|
|
|
/ II- A)
Rated no-load speed for the selection of appropriate application tools in accordance with EN IEC 62841-2-3. The actual no-load speed is lower for safety reasons and according to production tolerances.
- B)
Depends on protective guard ((10), (8), (11)) and auxiliary handle ((6), (5)) in use
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Values can vary depending upon the product and are subject to application and environmental conditions. For further information www.bosch-professional.com/wac.