Assembling the Saw Stand (see figures A1−A3)

• Carefully remove all parts included in the delivery from their packaging.
• Remove all packing material.
• Press the safety clip (4) and unfold the base frame (3).
• Insert the connection pieces (6) into the ends of the base frame (3) until the assembly holes are aligned.
• Screw together the connection pieces (6) and the base frame using the nuts and bolts in the fastening set (7).
• Insert the saw stand legs (5) in the connection pieces (6) until the assembly holes are aligned. Make sure that appropriate labelling (A, B, C, D) is used.
• Screw together the saw stand legs and the base frame using the nuts and bolts in the fastening set (7).