User interface
The user interface (12) is used to check the battery’s state of charge and to indicate the status of the system.
Battery charge indicator (user interface) (15) | Meaning/cause | Solution |
|---|---|---|
Green (2 to 5 bars) | Battery charged | – |
Yellow (1 bar) | Battery almost empty | Replace or charge battery soon |
Red (1 bar) | Battery empty | Replace or charge battery |
If no rechargeable battery is selected, the battery charge indicator (user interface) (15) always shows the status of the rechargeable battery with the lower capacity.
- To display the state of charge of a specific rechargeable battery, press the battery selection button (13) repeatedly until the symbol of the required rechargeable battery lights up next to the battery charge indicator (15) (A: Left rechargeable battery, B: Right rechargeable battery; see also the housing marking above the battery holders (18) in the cordless power unit).
Power tool status indicator (16) | Meaning/cause | Solution |
|---|---|---|
Green | Status OK | – |
Yellow | Critical temperature has been reached or rechargeable battery is almost empty | Allow the power tool to cool down, or replace or charge the battery |
Red | Power tool has overheated or rechargeable battery is empty | Allow the power tool to cool down, or replace or charge the battery |
Battery is too weak | Charge the battery or use the recommended battery type | |
General error |
If the error persists:
|