Setting Working Mode
The power tool offers two working modes for various applications.
Working mode | Function/recommended application |
|---|---|
Standard mode | In standard mode, the power tool works at maximum power. Use standard mode for general cable threading tasks. |
Soft mode | In soft mode, the power tool operates at reduced power. Use soft mode for delicate cables or when a lower tape speed is required. |
To switch between working modes, with the user interface (9) switched on, press the MODE button (18).
Note: Only change the working mode when the power tool is switched off and the status indicator (16) is lit green. To activate the user interface (9), press the MODE button (18) or the on/off switch (7).