User Interface (see figures B1–B2)
GNH18V-64-3: The user interface (7) is used to switch the worklight on and off and to indicate the status of the power tool.
GNH18V-64-3M: The user interface (7) is used to select the working mode and to indicate the status of the power tool.
GNH18V-64-3:
User interface | Description |
|---|---|
| The on/off button (21) switches the tool on and off. |
| The worklight button (22) switches the worklight on and off. |
| The on/off indicator (20) lights up when the tool is switched on. |
| The worklight "on" indicator (23) lights up when the worklight is switched on. |
| The worklight "off" indicator (24) lights up when the worklight is switched off. |
GNH18V-64-3M:
User interface | Description |
|---|---|
| The on/off button (21) switches the tool on and off. |
| The mode button (25) switches between single actuation and contact actuation. |
| The on/off indicator (20) lights up when the tool is switched on. |
| The single actuation indicator (26) lights up when single actuation is activated. |
| The contact actuation indicator (27) lights up when contact actuation is activated. |
