Mounting the Fan

Note: The fan can be mounted in a vertical or horizontal position. Make sure that the fan is mounted such that fan operation is not impeded.

Hanging Up on the Utility Hooks (see figure D–E)

Pull the utility hooks (9) fully out of the slots.
Rotate the utility hooks if necessary.

Note: It is only possible to rotate the utility hooks when they are fully extended.

Hang up the fan in a stable location (max. depth 36 mm).

Hanging Up on the Mounting Slots (see figure F)

Screw two screws (screw head diameter 4 – 6 mm) into the wall at a distance of 87 mm (vertical mounting) or 130 mm (horizontal mounting).
Position the middle sections of the mounting slots (12) above the screw heads.
Push the fan downwards until the screws are in the narrow parts of the mounting slots (12) and the fan is secured.